Kavala Grey Split Face Paving Cubes 10×10 cm

In stock

75,00 €

Price per m², incl. VAT.

Square paving cubes in grey Kavala slate, quarried from the slopes of Mount Paggaio in Northern Greece. Each cube measures 10×10 cm, with press-broken perimeter sides and natural large surfaces. Suitable for courtyards, pathways, cobblestone streets, parking lots and garages, and carries CE certification.

Key Features:

Description

GRAY KAVALA CUBES 10X10CM
The Gray Kavala Cubes 10x10cm are made from Kavala schist stone, quarried from the slopes of the historic Mount Paggaio in Northern Greece, in the Kavala region. This mountain was home to King Philip II’s gold mines, which supported his son Alexander the Great’s campaign.

It is a durable rock with high resistance to time, frost, minimal disintegration, and has an anti-slip surface.

The four perimeter sides are broken with a press, and the two large surfaces are natural.

Our company provides special CE marking for this product.

INSTALLATION OF CUBES ON CONCRETE SURFACES

A strong and suitable substrate is required for the cubes to be bonded.

Bonding is done using cement mortar, ensuring that the flatter and smoother surfaces are placed on the top visible side, giving the desired slopes.

During the cubing process, avoid creating gaps.

Be careful not to stain the top visible surface with mortar. If this happens, clean it immediately with a sponge and water before it dries.

The width and depth of the joint depend on the project’s specific requirements. The usual joint width for this material is between 1 and 2cm, and the depth is between 0 and 1cm (the smaller the depth, the more walkable the surface becomes).

The joints should not have holes or cracks.

There are various cube placement patterns, such as parallel or diagonal lines, semicircles, etc. The described pattern is considered the simplest and easiest for installation.

Thicker cubes can be laid directly on the ground without concrete or mortar for bonding. In this case, a different technique is required for both the substrate and installation.

In all cases, installation should be carried out by specialized, experienced craftsmen.

Other Names
The product is also available on the market under the following names: Natural Grey Cobblestone Kavala, Natural Grey Cobblestone Eleftheroupolis, Natural Grey Cobblestone Pangaio, Natural Grey Cobblestone Akrovouni, Pressed Cobblestone Kavala, Pavement with Grey Stone Cobblestones, Pedestrian Stone Pavements, Stone Grey Cobblestone Kavala, Grey Stone Cobblestone, Grey Cobblestone from Natural Stone, Cobles Granite Gray, Cobble Kavalas, Cobbles Grey.

Additional information

Material

3D Surface Variation

Thickness

Width
Peripheral Sides

Shape

Surface

Thickness Fluctuation

Placement Locations

GRAY KAVALA CUBES 10X10CM
The Gray Kavala Cubes 10x10cm are made from Kavala schist stone, quarried from the slopes of the historic Mount Paggaio in Northern Greece, in the Kavala region. This mountain was home to King Philip II’s gold mines, which supported his son Alexander the Great’s campaign.

It is a durable rock with high resistance to time, frost, minimal disintegration, and has an anti-slip surface.

The four perimeter sides are broken with a press, and the two large surfaces are natural.

Our company provides special CE marking for this product.

INSTALLATION OF CUBES ON CONCRETE SURFACES

A strong and suitable substrate is required for the cubes to be bonded.

Bonding is done using cement mortar, ensuring that the flatter and smoother surfaces are placed on the top visible side, giving the desired slopes.

During the cubing process, avoid creating gaps.

Be careful not to stain the top visible surface with mortar. If this happens, clean it immediately with a sponge and water before it dries.

The width and depth of the joint depend on the project’s specific requirements. The usual joint width for this material is between 1 and 2cm, and the depth is between 0 and 1cm (the smaller the depth, the more walkable the surface becomes).

The joints should not have holes or cracks.

There are various cube placement patterns, such as parallel or diagonal lines, semicircles, etc. The described pattern is considered the simplest and easiest for installation.

Thicker cubes can be laid directly on the ground without concrete or mortar for bonding. In this case, a different technique is required for both the substrate and installation.

In all cases, installation should be carried out by specialized, experienced craftsmen.

Other Names
The product is also available on the market under the following names: Natural Grey Cobblestone Kavala, Natural Grey Cobblestone Eleftheroupolis, Natural Grey Cobblestone Pangaio, Natural Grey Cobblestone Akrovouni, Pressed Cobblestone Kavala, Pavement with Grey Stone Cobblestones, Pedestrian Stone Pavements, Stone Grey Cobblestone Kavala, Grey Stone Cobblestone, Grey Cobblestone from Natural Stone, Cobles Granite Gray, Cobble Kavalas, Cobbles Grey.

Material

3D Surface Variation

Thickness

Width
Peripheral Sides

Shape

Surface

Thickness Fluctuation

Placement Locations

Delivery options

To provide you with the detailed delivery price, term and installation possibilities, we need to know the exact details of the products you are interested in and your location. Please fill in the form below and we will get back to you asap.

You can also call us if you do not wish to wait: 25 755 520

More Products